Check Engine Light Service 2020 Toyota Camry Hybrid
What do you do when you’re driving along in your Toyota Camry Hybrid and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks drastically because you may have precisely idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, calm breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is suggested that you get your 2020 Toyota Camry Hybrid checked promptly. Ignoring that warning could end up causing significant, considerable damage to pricey engine parts.
When your 2020 Toyota Camry Hybrid's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t right, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”
When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can rapidly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Stevinson Toyota West. There are still a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the explicitly right issue and repair it.
Is it safe to drive your 2020 Toyota Camry Hybrid with the check engine light on?
If the check engine light is flashing, this means that there is a serious issue and it is suggested to service your Toyota Camry Hybrid swiftly. This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is generally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. Call the experts at Stevinson Toyota West by dialing 7209029966 so you can describe the issues. Or lessen your speed and bring your 2020 Toyota to our certified mechanics as soon as potential.
2020 Toyota Camry Hybrid Check Engine Light Flashing
Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several regular causes including something as simple as a loose gas cap. Other often regular reasons for a Check Engine Light are dirty mass airflow sensor, defective emissions control part, defective head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, or damaged spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and completely repair it as required to restore factory specifications. When this hits, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was entirely fixed.
Every 2020 Toyota Camry Hybrid was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The rapid sensors are continually detecting conditions while sending vital data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. Yet, unfortunately that is the limitation of the Check Engine Light – it won’t tell you what precisely is wrong nor what to do about it. That’s where we come in; Stevinson Toyota West provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Certified Service professional.
What Does the Check Engine Light Mean?
One of the most commonly misunderstood lights or indicators in your 2020 Toyota Camry Hybrid is the check engine light. The check engine light is part of the important onboard diagnostics system, and displays in a variety of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2020 Toyota Camry Hybrid. Some of these essential duties include shifting automatic transmissions controlling engine speed, ignition timing, and implementing cohesion control, just to name a few. With that being said, the check engine light can mean an assortment of different things. It can be as simple as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2020 Toyota Camry Hybrid, contact Stevinson Toyota West. Our Toyota service department can support you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Stevinson Toyota West today!
What could cause the check engine light to come on in a 2020 Toyota Camry Hybrid?
When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could still be a warning of a meaningful problem that could cause serious damage to your engine and come with a hefty and pricey repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow ordinarily means something less serious but a flashing check engine light signifies that your vehicle’s engine is in significant trouble and helpful service is needed promptly. If your check engine light is flashing in your 2020 Toyota Camry Hybrid, we highly advocate not to drive the car and schedule Toyota service today. Below is a list of the most regular reasons your check engine light can come on:
- Your 2020 Toyota Camry Hybrid has a vacuum leak. Each Toyota Camry Hybrid has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower adverse emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceptionally if they’re exposed to intense heat or extreme cold.
- Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Toyota Camry Hybrid’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by regularly neglected maintenance, which is why Stevinson Toyota West offers a complimentary multi-point check with each Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Toyota Camry Hybrid will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other delicate problems from overheating.
- The battery is low or dead. The battery in your 2020 Toyota Camry Hybrid is each essential. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
- Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your 2020 Toyota Camry Hybrid if it’s not installed perfectly. These aftermarket components and accessories can drain the battery, trigger the check engine light, or even limit the car from starting. If these issues sound familiar, bring your Camry Hybrid to Toyota and have our team of talented certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or utilizing OEM components first place might cost a little bit more but could help you save considerably from having to get poor work and damage caused by poor installation work corrected.
- New Spark Plugs or Plug Wires are necessary for your 2020 Toyota Camry Hybrid. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will go through a evident poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more pricey repairs.
- Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more rapidly and your car will be less efficient when it comes to fuel economy. So what hits if I don’t change your O2 sensor? A defective sensor can not only affect your miles per gallon, but it can cause meaningful damage to your catalytic converter and your 2020 Toyota Camry Hybrid's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the exactly right mixture of air and fuel that enters the cylinders in your engine. A defective O2 sensor can also cause a vehicle to fail an emissions test.
- Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Camry Hybrid is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Toyota Camry Hybrid is having trouble starting, idling rough or has a sudden fast replace in the position of the throttle pedal, this could be a critical sign of a defective mass airflow sensor.
- One of the most regular and frequent cause is that your 2020 Toyota Camry Hybrid gas cap is loose, damaged or missing. The gas cap for your 2020 Toyota Camry Hybrid serves numerous purposes. It prevents unpredictable gas fumes from being released when you aren't driving, it seals the fuel system and helps cultivate pressure within the fuel tank. What hits if you have a defective fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more expensive. Luckily, to change a gas cap isn't pricey. If your check engine light turns on promptly after you put gas in your 2020 Toyota Camry Hybrid, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
2020 Toyota Camry Hybrid Check Engine Light
A flashing light reveals that the problem is very serious and if not taken care of expeditiously may result in extensive and significant damage to the vehicle. If the check engine light in your 2020 Toyota Camry Hybrid starts flashing, that means that the problem needs attention expeditiously and your Toyota should be brought in quickly. This blinking light frequently indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can rapidly raise the temperature of the catalytic converter to a point where damage is likely, requiring an pricey and huge repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A damaged, old or dirty spark plug can cause the engine to misfire. If the problem is entirely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is consistently flashing, please contact our team of automotive experts at Stevinson Toyota West swiftly by calling 7209029966.
Will the check engine light reset itself?
The check engine light on your 2020 Toyota Camry Hybrid will ordinarily shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will instantly turn itself off. Also, if your catalytic converter is working properly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Toyota Camry Hybrid light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Stevinson Toyota West so the light and code can be double-checked and reset.
How much does it cost to get the engine light checked?
The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the proper code reading and diagnosis. The average cost for a check engine light diagnosis & testing is ordinarily between $88 and $111. The good news, Stevinson Toyota West offers totally complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.
2020 Toyota Camry Hybrid Check Engine Light Codes
The check engine light turning on can be quite intimidating, particularly to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, again known as the OBD (on-board computer diagnostic system) in your Camry Hybrid. There are hundreds of different codes that your check engine light can properly represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your vehicle and will again allow that important Check Engine Light to do what it is absolutely supposed to do: be your guide. Unfortunately, apparent and useful vehicle symptoms do not invariably accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are again hundreds of likely reasons for the light, including:
- Computer output circuit issues
- Transmission issues
- Bad Spark Plugs
- Emissions controls issues
- Loose Gas Cap or Missing Gas Cap
- Old Battery
- O2 Sensor
- Fuel and air metering systems problems
- Ignition system faults
This is why it is vital for someone who does not have a lot of prevailing automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out promptly by a talented certified Toyota mechanic. Call Stevinson Toyota West at 7209029966 today or schedule your check engine light service online today! If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away.
How many miles can you drive with the check engine light?
Since each check engine code has its own level of severity, it is ordinarily difficult to predict how multiple miles you can be safe in driving with the warning light on. If you check engine light is flashing, we propose that you pull over and contact Stevinson Toyota West to support determine if your car is safe to drive in or if we propose a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.
